BMW 3 Series G20/G21 facelift (2019–2013)

BMW 3 Series m3 competition xdrive sedan

G20/G21 facelift (2019–2013), 2023–2024. Gasoline · 3.0 L · 503 hp · 8-speed automatic · All-wheel drive. 0–60 mph in 3.4 s and top speed 155 mph.

G20/G21 facelift (2019–2013) 2023 - 2024
9 Comparable trims
Solo Comparison mode
Engine type
Gasoline
Engine volume
3.0 L
Horsepower
503
Torque
479 lb-ft
Transmission
8-speed automatic
Drive
All-wheel drive
0–60 mph
3.4 s
Top speed
155 mph
Curb weight
4 lbs
Wheelbase
2858 mm
Dimensions
4803 × 1887 × 1433 mm
Fuel economy (city/hwy/combined)
15.0 / 22.0 / 18.0 mpg

General information

Brand country Germany
Vehicle class Compact Cars
Doors 4
Seats 5
Steering side Left-hand drive

Dimensions

Length 4803 mm
Width 1887 mm
Height 1433 mm
Wheelbase 2858 mm
Front track 63 mm
Rear track 64 mm
Wheel size 275/35R19 front, 285/30R20 rear

Volume and weight

Trunk volume min 13 L
Trunk volume max 13 L
Fuel tank capacity 15.6 gal
Curb weight 4 lbs

Engine

Engine type Gasoline
Engine position Front
Engine volume 3.0 L
Aspiration Twin turbocharged
Horsepower 503 hp
Torque 479 lb-ft
Cylinders 6
Valves per cylinder 4
Fuel system Direct injection
Compression ratio 9.3
Engine code S58
Valvetrain DOHC

Transmission

Transmission 8-speed automatic
Gears 8
Drive All-wheel drive

Performance

Top speed 155 mph
0–60 mph 3.4 s
Fuel economy standard MPG
Fuel economy city 15.0 mpg
Fuel economy highway 22.0 mpg
Fuel economy combined 18.0 mpg
Fuel type Premium unleaded (required)

Suspension and brakes

Front suspension Independent strut
Rear suspension Independent multi-link
Front brakes Ventilated disc
Rear brakes Ventilated disc

Compare with another modification

How to use this page

Read the metrics first, compare second

The top metric grid surfaces the spec highlights quickly. Once you have a close alternative in mind, the comparison table helps expose practical differences without opening multiple tabs.

Catalog context

This stays connected to the model tree

Breadcrumbs and the persistent catalog filter keep the user inside the same research flow from make to model, generation, and exact modification.